Відео

Great job

I just did this today. I just kept removing things and I got to the point where I almost opened the coolant line. Lol. Fortunately I was able to wiggle that thing out. The reassembly took Half as long. lol.

Could this cause fuses to smoke and no brake light

Great video, man! I decided it was pathetic that I don't know how to change my own oil so I watched this video and just did it. Hardest part was on my Ranger, the filter was really hard to get to, but other than that, a really smooth process. This video made it easy for me to tell what was what when it did it.

thank you so much for posting this, very informative. I'm torn on the multiple replacements...I just had this old Mexican guy whose been right way more times than I have tell me to take a portion of the old fluid and mix it with the new, which sounds off to me but I think I get the concept. I'm going to do a 2x replace and add the additive like you did. Camry 177K I'll let you know if anything bizarre happens...

Hola...me gustan tus videos,se entiende muy bien..y más me gusta por que tengo un corolla 95 manual del mismo color y es de Canadá,yo estoy en Argentina, difícil conseguir algunas cosa...( ejemplo, el faro de adelante y los espejos laterales.. 0:2🤦), el auto anda bárbaro...hize todos los cambios de fluidos, todos,..pero me esta fallando la caja de transmisión, no entra la quinta...podrías hacer un video de como se cambian, si está, no lo encontré ... Gracias...sos uno de los únicos que tiene los videos de estos Corolla que son una maza...!!!!

You just used the clamp to the ball joint yikes its still in service no issues?

Nice hit for the bj removal satisfying af

With a bj press you still need to cut the stud this time in just hammered it out and made my own cup with a piston off a checy front caliper and a grinder

It’s every climate bro honda vss or wss always rust stuck to the breaking point of the plastix

Clean cord, man I find out if you check your vehicle up and you don’t have an impact one thing I do with a neutral is a jerk the wheel like I’m gonna tighten it in that direction once it starts spinning I use the momentum of the tire and jerk it the other way and that losens emb up if you forget to loosen them on the ground

My geo doesn't leave room for a regular ratchet. The nut was so rusted and stuck I had to use a nut remover and end wrench.

Do the corolla and celica have the same exact radiator? I'm buying a corolla tomorrow and it needs a radiator and I was just gonna swap my celica one in if possible

What size of tonneau cover you got on this cuz I can’t find it I have same truck but king ranch model

I'm doing my 1999 Toyota Aristo with sat nav gps and the stock amp is located in the boot. 😢

Very informative video, i didn’t know how the Led side in the bulb needed to sit inside the housing. Thanks man

Do you know what's the original size of the exhaust pipe?

How much miles till you change that transmission fluid because mine looks no where near as dark. Mine is red with little slight tint a of gray 109000 miles toyota avalon

You desirve a subscribe man

Thank you!

This also as easy to the front sway bar bushings?

I just watched a video and you're taking more steps to take out your CV shaft. The other channel didn't bother with the brake lines.

Would you recommend me changing the transmission fluid on my 300 K mile one will it be safe? I don’t think it’s been done in a while.

I have a "Heritage" supercab 2004 with a 6.ft bed. I beefed up the leaf spring as it's carrying a 1200lb camper. What a diffence. Just picked it up today. Not cheap here in Alaska but nothing is. Great little V-6 truck. BTW my little gem has just turned 84,000 miles. Owner was a mining engineer and spent most of his time at Red Dog mine. Hardly drove it.

Thank you good video

so easiest way to instal them in projector housing will be to put an arrow with marker on bulb that shows top and bottom so you can turn them enough to know how they are positionited easy you can try

If your early model Lexus came with the Navigation system (my GS400 did), which also controls the HVAC (Heat/Vent/Air Conditioning), removing the outdated Navigation unit also removes your HVAC! I thought I was doomed for a minute. However, you likely have another option. As you can see in this video, models that did not have the Navigation system have a separate, single-DIN HVAC controller (shown above the factory radio at the beginning of this video). My Navigation unit sat in the top, and had a tape deck underneath. I found this separate HVAC controller module online, used for cheap. It fit perfectly in the space, and the electrical plugs that were removed from the Navigation model plugged right in to this standalone HVAC controller!

Re: Replacing the HVAC servo motors comment below, there are videos showing how to clean the encoder wheel, which worked on my GS400. You likely don't have to buy a new servo.

Don't buy a new servo! First, take the current servo out, and clean the encoder wheel and copper brush ends. Add a bit of dielectric (non-conductive) grease to the encoder wheel and gears. This is the best video showing how to remove/replace the mode select servo, but in many cases, you don't need to spend hundreds of $ on a new servo. Note: The fresh/cabin air selector servo is just to the right of the mode select servo, but tricky to remove. Re: Just clean and re-use your servo, search for "Lexus Air Conditioning Servo Repair and Cleaning Guide".

Im working on the exact same car right now lol Its a '94, but its a wagon in the same color. Great video!

Great video, wish i had your patience.

Do you have to jack the wheels up aswell or is it doable just putting car on stands ?? Only have stands and one jack

Those little ones are rebrands as Auxito. CLR tested those called Auxito - 10S. They produce 16.5W per bulb after the observation. And they get warm up to 141 degrees Fahrenheit. Which is very good. The lower the temperature, the better the lifespan is. The higher the wattage and temperature, the shorter the lifespan is.

I’m so glad there’s still more and more people that knows how led bulb works. Two sided led bulbs with big enough heatsink and cooling fan. A two sided led chips such as CSP,ZES,CSP flip chips, SMD, Osram, LMP, and Cree led chips that’s the same size of the halogen coil filament, with very thin center piece of the led bulbs works a lot better than halogen, and way better than those dreadful. Disgusting, horrible 3-4-5-6 sided or 360 degree cone shape led, square shape with a bubble led, or double stack led will never perform the same as original halogen headlight bulbs. I had an argument with one dude sayin u know nothing about led, yes we do. With lots of research, see them testing, lots of education. We truly do. Thanks to headlight revolution, car light reviews, Sergiu garbor, and bulbfacts. If it wasn’t for them, this would not happen.

I immediately laughed because my hood doesn't stay open too. 2007

I need the plug schematics for this dealer

Thanks about to attempt my sons 99 es300..

Bro just put some switch back led bulbs in the turn signal light

My new timing belt does not have lines on it for timing marks?

If there is oil residue on the plug what should I check

There are a ton of videos on how to fix little things on these trucks such as your keypad not working and your broken spring in your cup holder. Most are super easy to fix.

Nice truck!!! Fog lights however are not stock.

I have the 98 of this car. Doors are much of the same. Love your educational video!

Hey how have these parts held up, mine need replaced aswell it’s hard to decide what brand to go with. Any advice is greatly appreciated.

Rocking video bud you have a really good voice and clarity

DID YOU HAVE TO RE AIM THE LIGHTS?

I bought an 06 ranger in Colorado brand new. They don't use salt out there. I retired to North Carolina about 5 years ago. Its got about 160,000 miles. I'll keep it till it dies. Change your fluids! It should last another 10 years. 6 cylinder, 5 speed manual. I don't know how many people have come up to me over the years and ask me if I wanted to sell if.

Hi, first thanks for sharing and helping in a simple way. The GS300 has 2 servos? If yes, how do you access the other one?

Thank you ! It helped me for my 1994 starlet

Your videos make life so much easier. Great work man!